Sunday, 10 March 2013

Renewable Energy Sources


"Penulis sedang memikirkan bagaimana cara mengoptimalkan Energi Terbarukan di Tanah Air Indonesia"
~Lokasi Gunung Tangkuban Parahu~

Intro:

Renewable energy is energy generated from natural resources—such as sunlight, wind, rain, tides and geothermal heat—which are renewable (naturally replenished). In 2006, about 18% of global final energy consumption came from renewables, with 13% coming from traditional biomass, such as wood-burning. Hydroelectricity was the next largest renewable source, providing 3% (15% of global electricity generaiton ), followed by solar hot water/heating, which contributed 1.3%. Modern technologies, such as geothermal energy, wind power, solar power, and ocean energy together provided some 0.8% of final energy consumption.

Climate change concerns coupled with high oil prices, peak oil and increasing government support are driving increasing renewable energy legislation, incentives and commercialization. European Union leaders reached an agreement in principle in March 2007 that 20 percent of their nations' energy should be produced from renewable fuels by 2020, as part of its drive to cut emissions of carbon dioxide, blamed in part for global warming. Investment capital flowing into renewable energy climbed from $80 billion in 2005 to a record $100 billion in 2006.

Energy and The Future

If we are use renewable energy sources in the future, we must develop them now. In the early nineteenth century, the power base for most of the world was wood, a renewable energy source. 

Forests cannot grow fast enough to provide fuel for people's varied needs today, so the renewable sources on which we used to depend will no longer suffice. In this note we shall discusss harnessing energy from other renewable sources; Sunlight, Rivers and Streams, Geothermal Energy, the tides, the wind, Nuclear, and Bioenergy or the burning of garbage.

1. Solar Energy/Sunlight; If we could trap, concentrate, and store solar energy, human power needs would be fulfilled. Solar energy can be used either directly as heat or more indirectly for the production of electricity. Small-scale solar heaters are relatively cheap to build and are in common use in many parts of the world for water and space heating.

2. Hydroelectric Energy from Rivers and Streams; The sun evaporates water at sea level and the winds bring it to the mountains, where it collects into streams with potential to fall and release energy. Thus, hydroelectric energy is an indirect form of solar energy. As more sites are exploited, more power will be tapped by harnessing falling water. 

3. Geothermal Energy; Energy derived from the heat of the earth's crust, called geothermal energy, has gained increased attention in the past few years. In various places on the globe, such as in the hot springs and geysers of Tangkuban Parahu in Bandung or Kawah Kamojang in Garut, hot water is produced near the surface. 

4. Energy from the Tides; The force of the tides as a source of power has long intrigued man. Imagine a turbine that is immersed in the sea near shore. Electricity could be generated as the tides turn the turbine blades, but the output for a single generator would be small. Moreover, lining the coast with millions of small generators would be uneconomical. An alternative practical solution is to build a tidal dam across a bay or estuary where there is a large rise and fall of the tides. By damming and funneling the water, significant concentrations and economical power output can be realized. 

5. Energy from the Wind; The power of wind has been used since antiquity to pump water and grind grain. Construction of large-scale electric generating stations of this type would pose serious engineering problems because of their huge size, but small windmills as an auxiliary source of home electricity would be economical and would conserve other sources of power. 

6. Nuclear Energy; Man's first use of nuclear energy was for weapons. But the Manhattan project that led to the development of the atomic bomb during World War II also resulted in the development of several nuclear reactors to manufacture Uranium and Plutonium. Nuclear power come from two reactions Fission and Fusion. 

7. Bioenergy and Energy from the Burning of Garbage; Another practical proposal is to burn garbage as a renewable energy source, we called it PLTSA (Pembangkit Listrik Tenaga Sampah). Bioenergy is a source of power from organic matter such as biogas. 

Sources: 

1. Jonathan Turk, Ph.D. 
2. Amos Turk, Ph.D.

3. Arip Nurahman Notes

4. Physics Research Consulting 

Physical Science with Environmental and Other Practical Applications.

Energy and The Future

Saturday, 9 March 2013

Membangun Pembangkit Listrik Tenaga Panas Bumi


Kawah Gunung Tangkuban Parahu, Bandung, Jawa Barat. Indonesia

Intro:

Pembangkit Listrik Tenaga Panas Bumi adalah Pembangkit Listrik (Power generator) yang menggunakan Panas bumi (Geothermal) sebagai energi penggeraknya. Indonesia dikaruniai sumber panas Bumi yang berlimpah karena banyaknya gunung berapi di indonesia, dari pulau-pulau besar yang ada, hanya pulau Kalimantan saja yang tidak mempunyai potensi panas Bumi.
Untuk membangkitkan listrik dengan panas Bumi dilakukan dengan mengebor tanah di daerah yang berpotensi panas Bumi untuk membuat lubang gas panas yang akan dimanfaatkan untuk memanaskan ketel uap (boiler) sehingga uapnya bisa menggerakkan turbin uap yang tersambung ke Generator.
Untuk panas Bumi yang mempunyai tekanan tinggi, dapat langsung memutar turbin generator, setelah uap yang keluar dibersihkan terlebih dahulu. Pembangkit listrik tenaga panas Bumi termasuk sumber Energi terbaharui.

Geothermal Energy


Geothermal energy is thermal energy generated and stored in the Earth. Thermal energy is the energy that determines the temperature of matter. The Geothermal energy of the Earth's crust originates from the original formation of the planet (20%) and from radioactive decay of minerals (80%). The geothermal gradient, which is the difference in temperature between the core of the planet and its surface, drives a continuous conduction of thermal energy in the form of heat from the core to the surface. 

The adjective geothermal originates from the Greek roots γη (ge), meaning earth, and θερμος (thermos), meaning hot. At the core of the Earth, thermal energy is created by radioactive decay and temperatures may reach over 5000 degrees Celsius (9,000 degrees Fahrenheit). Heat conducts from the core to surrounding cooler rock. The high temperature and pressure cause some rock to melt, creating magma convection upward since it is lighter than the solid rock. 

The magma heats rock and water in the crust, sometimes up to 370 degrees Celsius (700 degrees Fahrenheit). From hot springs, geothermal energy has been used for bathing since Paleolithic times and for space heating since ancient Roman times, but it is now better known for electricity generation. Worldwide, about 10,715 megawatts (MW) of geothermal power is online in 24 countries. 

An additional 28 gigawatts of direct geothermal heating capacity is installed for district heating, space heating, spas, industrial processes, desalination and agricultural applications. 

Geothermal power is cost effective, reliable, sustainable, and environmentally friendly, but has historically been limited to areas near tectonic plate boundaries. Recent technological advances have dramatically expanded the range and size of viable resources, especially for applications such as home heating, opening a potential for widespread exploitation. Geothermal wells release greenhouse gases trapped deep within the earth, but these emissions are much lower per energy unit than those of fossil fuels. 

As a result, geothermal power has the potential to help mitigate global warming if widely deployed in place of fossil fuels. Direct application In the geothermal industry, low temperature means temperatures of 300 °F (149 °C) or less. Low-temperature geothermal resources are typically used in direct-use applications, such as district heating, greenhouses, fisheries, mineral recovery, and industrial process heating. However, some low-temperature resources can generate electricity using binary cycle electricity generating technology. 

Approximately 70 countries made direct use of 270 petajoules (PJ) of geothermal heating in 2004. More than half went for space heating, and another third for heated pools. The remainder supported industrial and agricultural applications. Global installed capacity was 28 GW, but capacity factors tend to be low (30% on average) since heat is mostly needed in winter. 

The above figures are dominated by 88 PJ of space heating extracted by an estimated 1.3 million geothermal heat pumps with a total capacity of 15 GW. Heat pumps for home heating are the fastest-growing means of exploiting geothermal energy, with a global annual growth rate of 30% in energy production. 

Direct heating is far more efficient than electricity generation and places less demanding temperature requirements on the heat resource. Heat may come from co-generation via a geothermal electrical plant or from smaller wells or heat exchangers buried in shallow ground. As a result, geothermal heating is economic at many more sites than geothermal electricity generation. Where natural hot springs or geysers are available, the heated water can be piped directly into radiators. If the ground is hot but dry, earth tubes or down hole heat exchangers can collect the heat. 

But even in areas where the ground is colder than room temperature, heat can still be extracted with a geothermal heat pump more cost-effectively and cleanly than by conventional furnaces. These devices draw on much shallower and colder resources than traditional geothermal techniques, and they frequently combine a variety of functions, including air conditioning, seasonal energy storage, solar energy collection, and electric heating. 

Geothermal heat pumps can be used for space heating essentially anywhere. Geothermal heat supports many applications. District heating applications use networks of piped hot water to heat many buildings across entire communities. More than 72 countries have reported direct use of geothermal energy, Iceland being the world leader. 93% of its homes are heated with geothermal energy, saving Iceland over $100 million annually in avoided oil imports. Reykjavík, Iceland has the biggest district heating system on the globe. Once known as the most polluted city in the world, it is now one of the cleanest due to geothermal energy. 

Enhanced Geothermal System
1:Reservoir, 2:Pump House 
3:Heat Exchanger, 4:Turbine Hall 
5:Production Well, 6:Injection Well 
7:Hot Water to District Heating, 8:Porous Sediments 
9:Observation Well, 10:Crystalline Bedrock


Potensi Energi Panas Bumi di Indonesia 

Salah satu potensi sumber energi terbesar di Indonesia adalah energi panas bumi. Indonesia setidaknya menyimpan 28.994 MWe (megawatt-elektrikal) potensi panas bumi, namun hingga saat ini hanya sekitar 4 % atau 1,2 MWe yang telah dimanfaatkan. Jumlah ini masih sangat jauh jika dibandingkan dengan Filipina yang telah mengeksplorasi hingga 70% dari total potensi panas buminya. 

Badan Survey Geologi Kolonial Belanda (DGCS) pertama kali memetakan potensi energi panas bumi di awal abad 20. Pada tahun 1969 eskplorasi lebih lanjut dilakukan oleh Survey Geologi Indonesia. Pada tahun 2011 tercatat dari sekitar 276 area geothermal di Indonesia, 37 diantaranya merupakan area pertambangan (WKP [Wilayah Kerja Pertambangan]) dengan potensi panas bumi sebesar 7.376 MWe. 

Semakin pesatnya pertumbuhan ekonomi di Indonesia menyebabkan adanya peningkatan kebutuhan energi, sementara hingga saat ini, Indonesia masih sangat bergantung pada sumber energi fosil. Jika hal ini terus terjadi, maka diperkirakan 2 atau 3 dekade yang akan datang, akan terjadi krisis energi yang semakin parah. 

Potensi geothermal di Indonesia tidak hanya mengingat cadangannya yang sangat besar, namun juga pertimbangan ekonomi dan ketahanan energi nasional jika sektor ini bisa dikembangkan dan dikelola dengan baik. Pengurangan emisi yang bersumber dari pembakaran sumber energi fosil dan pengurangan beban subsidi energi dapat dilakukan. 

Geothermal yang bersifat site specific sangat menguntungkan mengingat sifatnya yang tidak dapat disimpan dan tidak dapat ditransportasikan dalam jarak yang jauh membuat sumber ini tidak dapat menjadi komoditi ekspor, sehingga akan lebih stabil dan terhindar dari fluktuasi harga energi di dunia. Keuntungan lain dari pemanfaatan geothermal adalah rendahnya emisi yang dihasilkan. 

Beberapa studi menunjukkan bahwa peningkatan kapasitas geothermal dapat mengurangi tingkat emisi gas rumah kaca (GRK) terutama CO2. Menurut laporan WWF’s Ring of Fire Geothermal Scenario, potensi geothermal diperkirakan dapat mengurangi emisi tahunan hingga 13,6 juta ton CO2 pada tahun 2015 dan 19,8 juta ton pada tahun 2020.

"Potensi Energi Panas Bumi di Indonesia adalah 40% dari Kapasitas Total Energi Panas Bumi Dunia jika kita mampu mengoptimalkan energi ini maka Insha Allah Bangsa ini akan menuai Kemerdekaan  Energi"
~Arip Nurahman~

Sources: 

1. http://en.wikipedia.org/wiki/Geothermal_energy
2. http://en.wikipedia.org/wiki/Geothermal_electricity
3. http://www.ebtke.esdm.go.id/
4. Arip Nurahman Notes

Ucapan Terima Kasih Kepada:

Sahabat-sahabatku:

Ridwan Firdaus (Geografi Universitas Negeri Jakarta), Ade Akhyar Nurdin (Teknik Geologi Universitas Jendral Soedirman), Widia Prima (Teknik Sipil, Sekolah Tinggi Teknologi Garut), Deni Nugraha (Ilmu Pemerintahan STISIP Banjar), Ismail Muhammad S. (Sosial Ekonomi Pertanian Universitas Jendral Soedirman), Farid Waliyuddin R. (Sekolah Tinggi Akuntansi Negara), Muhlaso Dian A. (Institute Pemerintahan Dalam Negeri).

Kepada FORSALIM

Dan semua alumni "paguron mosque keeper" Manbaul Ulum SMAN 1 Banjar


Photo by: Kang Agus Haeruman, S.Si.

Friday, 8 March 2013

Fisika Quantum: Ilusi atau Realita?

"I like relativity and quantum theories
Because I don’t understand them
And they make me feel as if space shifted
About like a swan that can’t settle
Refusing to sit still and be measured
And as if the atom were an impulsive thing
Always changing its mind."
~D. H. Lawrence~



Topik Penelitian Pada Pusat IPTEK Quantum di National University of Singapore 

Quantum mechanics (QM – also known as quantum physics quantum theory is a branch of physics dealing with physical phenomena at microscopic scales, where the action is on the order of the Planck constant. Quantum mechanics departs from classical mechanics primarily at the quantum realm of atomic and subatomic length scales. Quantum mechanics provides a mathematical description of much of the dual and behavior and interactions of energy and matter. 
The mathematical formulations of quantum mechanics are those mathematical formalisms that permit a rigorous description of quantum mechanics. Such are distinguished from mathematical formalisms for theories developed prior to the early 1900s by the use of abstract mathematical structures, such as infinite-dimensional Hilbert spaces and operators on these spaces.
Many of these structures are drawn from functional analysis, a research area within pure mathematics that was influenced in part by the needs of quantum mechanics. In brief, values of physical observables such as energy and momentum were no longer considered as values of functions on phase space, but as eigenvalues; more precisely: as spectral values (point spectrum plus absolute continuous plus singular continuous spectrum) of linear operators in Hilbert space.

Mathematical structure of quantum mechanics
A physical system is generally described by three basic ingredients: states; observables; and dynamics (or law of time evolution) or, more generally, a group of physical symmetries. A classical description can be given in a fairly direct way by a phase space model of mechanics: states are points in a symplectic phase space, observables are real-valued functions on it, time evolution is given by a one-parameter group of symplectic transformations of the phase space, and physical symmetries are realized by symplectic transformations.
A quantum description consists of a Hilbert space of states, observables are self adjoint operators on the space of states, time evolution is given by a one-parameter group of unitary transformations on the Hilbert space of states, and physical symmetries are realized by unitary transformations.

Quantum harmonic oscillator


As in the classical case, the potential for the quantum harmonic oscillator is given by:
V(x)=\frac{1}{2}m\omega^2x^2
This problem can be solved either by solving the Schrödinger equation directly, which is not trivial, or by using the more elegant "ladder method", first proposed by Paul Dirac. Theeigenstates are given by:
  \psi_n(x) = \sqrt{\frac{1}{2^n\,n!}} \cdot \left(\frac{m\omega}{\pi \hbar}\right)^{1/4} \cdot e^{
- \frac{m\omega x^2}{2 \hbar}} \cdot H_n\left(\sqrt{\frac{m\omega}{\hbar}} x \right), \qquad n = 0,1,2,\ldots.
where Hn are the Hermite polynomials:
H_n(x)=(-1)^n e^{x^2}\frac{d^n}{dx^n}\left(e^{-x^2}\right)
and the corresponding energy levels are
 E_n = \hbar \omega \left(n + {1\over 2}\right).
This is another example which illustrates the quantization of energy for bound states.

Some Application of Quantum Mecahnics
Book Editor By: 
Prof. Mohammad Reza Pahlavani, Ph.D. 
Mazandaran University of Iran, Iran.





National University of Singapore Center for Quantum Technologies Graduate Student Theses


2012

2011

2010

2009

2008



Center for Quantum Technologies Software Projects

SOMIM

Search for Optimal Measurements using Iterative Methods (SOMIM), a program that can calculate the maximum mutual information and the corresponding optimal POVM outcomes given a set of statistical operators.

SeCQC

SeCQC is an open-source program code which implements a numerical Search for the classical Capacity of Quantum Channels (SeCQC) by using an iterative method. Given a quantum channel, SeCQC finds the statistical operators and POVM outcomes that maximize the accessible information, and thus determines the classical capacity of the quantum channel.

QCrypto

This is the repository for the source code used in a series of quantum key distribution experiments from key generation in form time-stamped detector data to error correction and privacy amplification. The code was designed to work with entanglement-based pair detection schemes, either implementing a BB84-type/BBM92 protocol, or an Ekert-91 protocol, which we used for our implementations of quantum key ditribution systems.


Sources:


http://en.wikipedia.org/wiki/Quantum_mechanics

Center for Quantum Technologies

Arip Nurahman Notes

Ucapan Terima Kasih:

1. Bpk. Dr. Miftachul Hadi, M.Sc. [Penulis dan Peneliti Fisika Produktif dari LIPI]

2. Kang Agus Haeruman, S.Si. [MTU Singapore]


Dan kepada teman-teman di Group Physics Research Consulting

Maju terus ilmu pengetahuan Indonesia, Semangat Kita Bisa

Amin.